135 Degree Elbow Silicone Hose – Polyester, Nomex, Fluoro

135 degree silicone hose - polyester reinforced

135 degree elbow silicone hose, reinforced by polyester, is very effective for carrying air, water, coolant, or sprayed by small amount of oil mist. It is often be found in vehicle cooling systems like cold sides of intercooler air hoses and general industrial applications within the temperature of -50 °F to +170 °F.

One blue 135 degree silicone hose is displayed from two angles.
135 degree silicone hose in blue.

Features:

  • Ideal working temperature: -50 °C to +170 °C.
  • 3-5 ply polyester reinforcement.
  • Silicone liner used as a barrier to isolate media.
  • UV and ozone resistant.
  • Colors: black, red, blue.
135 degree Elbow Silicone hose
Part No. Bore size Leg length Plies Wall
mm mm mm
E135-22 22 100 3 3.5
E135-25 25 100 3 3.5
E135-28 28 100 3 3.5
E135-30 30 100 3 3.5
E135-32 32 100 3 3.5
E135-35 35 100 3 3.5
E135-38 38 100 3 3.5
E135-51 51 100 4 5
E135-54 54 100 4 5
E135-57 57 100 4 5
E135-60 60 125 4 5
E135-63 63 125 4 5
E135-70 70 125 4 5
E135-76 76 125 4 5

135 degree silicone hose - Nomex reinforced for High Temp

135 degree silicone hose -Nomex reinforced, 3-4 plies

Nomex is a flame-resistant, high thermal and chemical resistant fiber. At extraordinarily high temperatures, it still maintains its properties without excessive softeness. It is especially suitable for turbo boost hoses, hot side intercooler hoses and EGR connectors.

Features

  • Working temperature: –50 °C to +250 °C.
  • Nomex reinforced 3 - 5 ply.
  • UV and ozone resistant.
  • Silicone hose creates a barrier to isolate media.
Products specification
Part No. Internal Diameter Leg Length Plies Wall Color
mm inch mm mm
E135-13 HT 13 1/2 102 × 102 3 4 Black
E135-16 HT 16 5/8 102 × 102 3 4 Black
E135-19 HT 19 3/4 102 × 102 3 4 Black
E135-25 HT 25 1 102 × 102 3 4 Black
E135-32 HT 32 1-1/4 102 × 102 3 4 Black
E135-35 HT 35 1-3/8 102 × 102 3 4 Black
E135-38 HT 38 1-1/2 102 × 102 3 4 Black
E135-51 HT 51 2 102 × 102 4 5 Black
E135-60 HT 60 2-3/8 102 × 102 4 5 Black
E135-63 HT 63 2-1/2 102 × 102 4 5 Black
E135-70 HT 70 2-3/4 102 × 102 4 5 Black
E135-76 HT 76 3 102 × 102 4 5 Black

135 degree silicone hose - Fluoro lined

Fluoro lined silicone hoses not only withstand extreme temperatures, generally from –55 °C to +170 °C, but also are quite compatible with hydrocarbon liquids, such as petrol, diesel and other oils. It is often used in turbocharger and intercooler hoses which meet Euro 3 and 4 emission levels.
In addition, Fluoro of high concentration at 80/20 is used and the liner of Fluoro is 1mm in thickness. Some manufacturers dilute the material just for lowering cost and making the liner thinner. This will not reach the expected effects and the hose will be corroded quickly.

Features:

  • Working temperature: –55 °C to 250 °C.
  • Fluoro lined for contacting with oils.
  • Polyester fiber reinforced 3 to 4 plies.
  • Especially used in turbocharger and intercooler hoses.
  • Low permeation.
  • Colors: black, red, blue.

Remark: Fluoro lined silicone hoses are available for contacting with oils or oil mists.

Product specification
Part No. Internal Diameter Leg Length Plies Wall
mm inch mm mm
E135-13 FL 13 1/2 102 × 102 3 4
E135-16 FL 16 5/8 102 × 102 3 4
E135-19 FL 19 3/4 102 × 102 3 4
E135-25 FL 25 1 102 × 102 3 4
E135-32 FL 32 1-1/4 102 × 102 3 4
E135-35 FL 35 1-3/8 102 × 102 3 4
E135-38 FL 38 1-1/2 102 × 102 3 4